Advance Certificate EV Technology & Business management

India represents the fourth largest automobile market in the world and the second-largest two-wheeler market. It is also a country with massive dependency on oil imports, with a USD 112 billion oil import bill in FY19. EV market likely to be Rs 50,000-cr opportunity in India by 2025. India is expected to command leadership in EV space with a projected share of 30% of new vehicles sold by 2030. Government has tabled a proposal to have a charging station every 3KM in major cities & every 50KM on major national highway. Growing Sales of Electric Vehicles - A Significant Opportunity for Li-ion Batteries Market. The government plans to offer $4.6 billion in incentives to companies setting up advanced battery manufacturing facilities as it seeks to promote the use of electric vehicles and cut down its dependence on oil, according to a government proposal seen by Reuters.

In this fast moving Electric Vehicle Market Academy of EV Technology a fully focused in Entrepreneurship development offering a startup and business friendly course to make you or your organization to flourish in this new age technological market.

This course will deliver from basic of EV to EVSE equipment like Lithium-ion battery, Battery pack assembly process, EV Motor, Charger, charging station development and all others parts/ equipment’s calculation, selection, building a Legal Foundation, Understanding Finance Basics, Business Planning and Fundraising.

TRAINING METHODOLOGY:

Live Interactive Classes::

AEVT Live Interactive Class, where students and teachers meet together at schedule class time with whiteboard, voice and live video, Lectures and Question answer occur at the same hour.

Our expert faculty members take session on each paper that is delivered through live sessions. These sessions are joined by students from India and Abroad. Trainers will discuss in each class session about Key concepts, whiteboard calculation, design, costing, documentation, case studies and real life examples. Students also get chance to clarify their doubts / academic clarifications. If by any chance you miss these live classes, don't worry, each class recorded sessions are uploaded in the AEVT E-Library/LMS.

Hands-on Practical

We know that only theoretical knowledge by online or virtual classes are not sufficient to get full expertise. An individual needs a practical exposure to flourish in a Job or business market.
So we offer practical session at AEVT Lab/Workshop after completion of live interactive online classroom session .In this approach a trainees can fulfill his/her knowledge in a very effective way and time.

We offer project-based blended learning experiences that promote academic and career success for Technical Education.

Teaching and Learning Material

AEVT have dedicated online library (AEVT E-Library) facility for students and stored all Learning Material (E-book, class recording, business releated documents) at AEVT E-Library.
AEVT E Library System provides access to more than 100 + e-books covering all fields of knowledge, e.g. EV Battery - BMS, Charging Station Design, Installation, Government rules and Business opportunity etc and also we have a huge collection of national and international journals, case studies, research papers.Student can access this E-library for self study.

Eligibility

For Entrepreneurs, Startups:
Minimum Educational Qualifications: 12th Pass
Minimum age 18 years, No Upper Age bar

Medium:

English

Dedicated Service Desk for Startups - EDP Desk

"Ringfenced resource to support your business".

GATE Trust dedicated service desk will provide you with access to a group of engineers, advisors to supporting you and your business needs.

Certificate will be Awarded by

Academy of EV Technology, A Unit of Global Advanced Training & Educational Trust, Regd. under NCT New Delhi, Govt. of India

Online Virtual Class and Offline Practical Course

Course Syllabus:

Click to Explore

Unit: BEE

Basic Electrical Engineering

Electrical parts of electric Vehicle - The motors, batteries, inverters, chargers, and power wiring between those parts, are what's new in the car now that it is finally electric again.
  • Major Components in an Electric Vehicle Powertrain - Vehicle Dynamics, Controllers
  • Different Types of High-efficiency Motor Technology
    1. Motor Types
    2. Selection and sizing of Motor
    3. Motor Control Functions and Applications
    4. Selection methodology
  • Power Converters
  • PID Controlled PWM
  • Others Electronic components - Switches, High-performance Control Circuit, Microcontrollers, Gate Drivers, Snubber Circuits, Electric engine, Regenerative braking
  • Grid and Renewable Sources - Effect of EV charging on the Distribution Grid

Unit: EVT

Electric Vehicle Technology

  • Electric vehicle configuration Vehicle Dynamics
  • Types of Electric Vehicle -
    1. Hybrid Electric Vehicles
    2. Plug-in Hybrids
    3. Battery Electric Vehicles
  • Type of Charger
  • Clarification & Specification Discussion
    1. Bharat EV AC Charger (BEVC-AC001)
    2. Bharat EV DC Charger (BEVC-DC001)
    3. DC Fast Charging
  • Basic principles of regenerative braking, Basic principles of conventional braking

Click to Explore

Unit: B-1

Types of Battery and Classification

A brief classification of li Ion cell technology and its electro-chemistry. Advantage and disadvantages of over different cell technologies.
  • History of development of Battery Technology
  • Energy storage technology in Electric vehicle
  • Comparison between IC Engine and EV energy storage Technology
  • Introduction to Lithium ion Cell
  • Role and responsibilities of BMS
  • Basic understanding of BMS Connections

Unit: B-2

Li ion cell Parameters

  • Battery cell parameters like cell voltage
  • Cell AH, Specific energy, life Cycle
  • Charging and discharging curve of li ion cells
  • C-rating,
  • Self discharge and other parameters like SOC, DOD

Unit: B-3

Battery Pack Sizing Considerations

  • Battery Pack sizing consideration like Time and charge/discharge cycles
  • Beginning of life (BOL)
  • End of life (EOL), Time
  • Battery life testing

Unit: B-4

Battery Charging, Protection, and Management System

  • why a BMS need for a battery pack
  • BMS building blocks
  • BMS characteristics
  • BMS operation
  • BMS classification

Unit: B-5

Battery Pack Sizing

size battery pack with considering all aspect of condition -
  • Range Calculation
  • Battery Capacity
  • Battery String Calculation

Unit: B-6

Battery Pack construction

  • Material need to assemble battery pack
  • Wires, connector selection, heat shrink, cell holder etc.
  • Different types of accessories related to battery pack construction
  • Battery Pack Assembly line - Cell testing & sorting, Module Formation, Spot Welding, Module BMS
  • Battery Pack Assembly line - Thermal management, Module to Pack Formation, Master BMS intregration
  • Battery Pack Assembly line - Pack Housing, Testing, Quality Certification

Unit: B-7

Battery Pack Assembly process

  • Manufacturing process of battery pack
  • Safety Considerations for BMS (Thermal Runaway, Short Circuit Detection etc)
  • Functional Safety Overview
  • Brief discussion about different machineries used in manufacturing
  • Flow chart of assembly process of li ion battery pack
  • Technical details of manufacturing machineries

Unit: B-8

Financial Projection of Li ion battery pack Manufacturing

  • Cost analysis of different machineries and manpower requirements
  • Return of Investment (ROI) of li ion battery pack business
  • Business projection to start a li ion battery pack business

Unit: CI

Charging Infrastructure - Electric Drive and controller

  • Introduction to EV Charging technology
  • Onboard charging and Off-board charging
  • AC charging vs DC charging
  • Conductive Charging - AC & DC
  • Inductive Charging Static
  • Inductive Charging Dynamic
  • AC charging - Type 1,2,3
  • DC charging - Chademo, Tesla, CCS
  • Fast charging and its limitations
  • Smart charging and applications
  • Introduction of Vehicle to grid (V2G) technology
  • Introduction of Wireless charging of EV
  • On-road charging of EV
  • Battery swap technology
  • Solar-powered EVs
  • Electric Vehicle Supply Equipment -
    1. Different types of EV charger connectors
    2. single-phase or three-phase socket
    3. SAE J1773
    4. CHAdeMO standard - DC fast charging
    5. SAE J1772 Combo
  • Cords and Cables, Earthing, Lightning Protection of Electric Vehicle Charging, Residual current device (RCD)
  • National & International EV Standard Codes - IEC applicable for EVSE

Unit: CSA

Charging Station Site Assessment

  • site analysis for EV charging station
  • Choosing the location - Public charging stations
  • Site Selection Considerations, General Site Issues, URDPFI Guidelines, Planning Considerations
  • Design Guidelines and Site Drawings, EVSE Typical Site Plans, Station Configuration

Unit: CSD-1

Charging Station Design & Costing - EV with PV

  • Energy consumption
  • Guidelines on Charging Infrastructure
  • Public Charging Infrastructure (PCI) - Components of charging station
  • Finincial Detail of charging station
  • Proposed Tariff for EV Charging
  • Electric Vehicle Charging Tariff in Different States of India

Unit: CSD-2

Charging Station Design & Costing - Part 2

  • PLANNING FOR YOUR STATION
  • Solar powered electric vehicle charging station
  • Calculation and selection - Components of charging station
  • Finincial Detail of charging station

Unit: CSD-3

Charging Station Design - Part 3

  • Design On-Grid solar charging stations for a parking lot
  • Plans for EVSE Installation
  • Single line diagram of charging station
  • EV Related Signage

Unit: SEV

Safety for EV Charging System

  • Electrical safety from the charging socket to the electric vehicle
  • Different aspects of electric safety
  • Electric Vehicle Charging Safety Guidelines
  • Protection against electric shock, fault protection
  • IEC IEC 60068-2 (1,2,14,30), IEC 61683, IEC 60227, IEC 60502 IEC 60947 part I,II, III ,IEC 61215 and more

Unit: ICS

Installation of EV Charging Station

  • Charging Station Permitting
  • Execution of work
    1. Installation Instruction
    2. Installing an outdoor public station
    3. Pedestal Charging station
  • Installation Procedure

Unit: EVB

EV Business - Government rules and opportunity

Future trends in electric vehicle domain

  • Wireless charging of EV
  • On-road charging of EV
  • Battery swap technology
  • Solar powered EVs Charging EVs from renewables

Business Model/Case Study

  • What is the size of the EV market in India?
  • Govt. Policies and Regulations
  • Business models, Utilities , Charging space providers, Battery swapping, Digital and information technology
  • Business Model

Project based Practical

Battery Project

Self Project Documentation: Lithuim-ion Battery pack Production Line


Battery Lab

Lithuim-ion Battery pack Production Line
Optional: Ondemand 3 Days Practical available at Head office at any time.

  1. Pre production Testing
  2. Cell Capacity Testing
  3. Lithium-ion Battery layout drawing & design
  4. Selection of Battery Pack Construction Meterials
  5. Cells Spot welding
  6. BMS Intregation
  7. Install in Thermal Isolation
  8. Battery Pack Enclosure Installation
  9. Battery Pack Ageing (Charging Discharging) Test
  10. Battery pack Quality Testing
  11. Preparation of Battery pack Datasheet
  12. Pack specification, safety sign, Leveling
  13. Boxing for Transport

CS Project

Self Project Documentation: Road side Public Charging Station

  1. Location Selection
  2. Volume of Vehicle Projection
  3. CS Design
  4. BOQ
  5. Financial Projection
  6. Vendor Selection
  7. Work Flow Presentation
  8. Approval Documentation
  9. Income and ROI Projection
  10. Final Project Documentation

CS Lab

Level - II Charging station Installation
Optional: Ondemand 1 Day Practical available at Head office at any time.

  1. Read the manufacturer’s installation instructions
  2. Check drawings and specifications
  3. Calculate the total load according to the Code and ensure there is an adequate supply voltage distribution panel nearby;
  4. Check required conduits and excavation
  5. Provide physical protection from vehicle impacts, e.g., bumper posts, safety clearance or a raised platform.
  6. Provide for adequate lighting of the station and the surrounding area
  7. Clearly identify where charging vehicles are to park, using both ground markings and signage
  8. Follow Installation Flowchart
  9. Follow Electrical Connection Flowchart
  10. Follow Electrical Code and EVSE Code
  11. A separate branch circuit is installed for each station
  12. Follow Electrical distribution room design
  13. Follow Single-phase distribution wiring
  14. Supply line switch on
  15. Charger Switch on
  16. Troubleshooting of Charger
  17. Connect Charger gun with vehicle (Prototype Model), Test charging
  18. Disconnect Charger form Prototype Model
  19. Check Charging billing system
  20. Safety practice for CS Satff members
  21. Regular and Periodic Maintaince

Indian candidates Fees
Online Live Class Fees: Rs. 29999/-
Discount on Live Class Fees= 30%
Fees after discount: Rs. 20999/-
Lab Practical Fees: Rs. 3,999/-
All Fees Excluding 18% GST
If you are interested to join at Practical session, we will inform you and pay Hands on Practical Fees at that time.

Foreign Candidates Fees
Online Live Class Fees: $ 470 USD
Discount on Live Class Fees= 30%
Fees after discount: $ 329 USD
All Fees Excluding 18% GST

Submit Registration

Admission Process

  1. Submit Registration
  2. AEVT Admission cell will check form data and they will inform you to pay Course fees
  3. Deposit Course fees
  4. Admission cell will send your E-registration certificate and E-library access
  5. Training cell will send you class schedule
  6. Trainiers Team will send your class link
  7. Training cell inform you about practical session at the end of Online live class session
  8. Exam cell will conduct online examination and send E-Certificate, E-marksheet
  9. EDP Desk will provide business guide/support for you (https://edpdesk.gatetrust.org )

Become an EV Expert with Verified Skill Certification

Demo Certificate
Academy of EV Technology is a unit of Global Advanced Training and Educational Trust (GATE Trust), An International Institute

1. An Autonomous Institute registered under NCT, Govt. of India under Indian Trust Act.
2. Registered Under NGO-DARPAN, NITI Aayog Govt. of India
3. ISO 9001:2015 registered Educational Trust
4. Academic Partner of University of Petroleum & Energy Studies (2020)
5. Registered under 80G and 12A and CS